Iron sulfideWhat is the beneficiation system? The following introduces you:

The iron sulfide beneficiation system is equipped with a supply car at the lower outlet of the upper hopper. The material is crushed by the primary crusher, and then transported to the silo via the relay station. A feeder is installed under the lower exit of the silo. The material ground with a ball mill is a first-stage magnetic separator.

The screened tailings tank is connected to the sulfur pond, and the significant characteristic of the sulfur powder ratio is used to obtain sulfur powder by precipitation. The sulfur powder is sent to the flotation device for flotation. After flotation, the fine sulfur powder is obtained by precipitation in the sedimentation tank. The yield of iron ore powder screened by this iron sulfide beneficiation system is more than 99%, the grade of iron is more than 68%, and the grade of sulfur powder is more than 45%. The advantages of low cost, high profit and avoid waste of resources.

The iron sulfide beneficiation system includes a power supply device, a water supply device, a crushing device, a grinding and beneficiation device, and pipelines. The crushing device is equipped with a feeding cart at the lower outlet end of the upper hopper. The first-stage crusher is installed at the lower front end of the feeding cart. The conveyor is installed between the primary crusher and the secondary crusher. The belt conveyor is installed between the magnetized wheel and the tape cassette. Feeder, ball mill of grinding and beneficiation device, feeder connection, equalizer, ball mill, coke detection equipment at the lower end of the outlet.

The above is the introduction of the iron sulfide beneficiation system. If you want to know more information, please click on our official website. We will update more content in subsequent articles. If you have product requirements, please call us, thank you very much for reading.