Regarding grinding, it is mainly the choice of grinding material additives, which is related to the material of the workpiece. The main media in the abrasive materials include corundum abrasive abrasive materials, corn cob abrasive materials, walnut kernel abrasive materials, high-frequency ceramic abrasive materials, alumina abrasive materials, zirconium beads abrasive materials and many other varieties, which have their own characteristics and adaptability.

If used appropriately, the surface of the workpiece can be made, so whether the selection of the grinding media is correct can directly play a decisive role in the quality of the surface of the workpiece. Abrasive material additives are the key to determining the surface quality of the workpiece. When grinding and polishing the workpiece, the material used is different according to the purpose of the workpiece.

For example, the material of the workpiece is either metal or non-metal, but the metal is iron, steel, copper, zinc, aluminum, alloy, etc. Each has different characteristics, and the surface abrasive materials used should also be different. When we perform the surface treatment of the workpiece, we must choose the abrasive material that best meets the requirements of the workpiece according to the final characteristics and requirements of the workpiece.

When the material of the polished workpiece is a ferrous metal forging, etc., use the corresponding material for processing. If the surface roughness of this kind of workpiece is not required, when removing burrs, you can choose abrasive grains with hardness, coarser grain size and slightly stronger cutting ability for treatment. For example, it can quickly remove burrs on the surface of workpieces such as corundum abrasive grains. If an appropriate amount of abrasive liquid is added to the corundum abrasive for processing, the surface grinding treatment speed of the workpiece will increase and the surface will become smooth. When the surface of the workpiece requires high gloss, the selected abrasive particles for deburring and rounding have a certain cutting ability.

The above is the introduction of the types of abrasive additives, thanks for reading.